Advantages of PVC flooring

//osta.in.ua/wp-content/uploads/2018/01/1.png RESISTANCE TO TEMPERATURE FLUCTUATIONS -40 +70 С

OSTA modular tiles have increased heat-resistance and fireproof properties. The maximum material expansion is up to 1%. Operating temperature -40 +70 С (104 - 158 F). Inflammability temperature not lower than 470 С (878F).

//osta.in.ua/wp-content/uploads/2018/02/assembling.png Possibility of 100% sealing of seams

At the request of the Customer, all types of OSTATm plate modules can be welded with each other using special technology. The floor forms a fully sealed array of slab modules. This type of flooring is used in rooms with high humidity or that require constant wet cleaning.

//osta.in.ua/wp-content/uploads/2018/01/6.png CHEMICAL RESISTANCE

OSTA PVC floor is resistant to: acids, alkalis, alcohols, engine oils, oxidants and non-flammable. The floor has good dielectric properties.

//osta.in.ua/wp-content/uploads/2018/01/5.png DURABILITY

OSTA floor systems for industrial facilities are produced from secondary PVC (polyvinylchloride). The properties of the material ensure long-term operation of the modular tiles and resistance to aggressive external environment. The estimated service life of OSTA floor is 20 years.

//osta.in.ua/wp-content/uploads/2018/01/4.png FLOOR INSTALLATION WITHOUT PRODUCTION INTERRUPTION

The modular tiles have special locks – the installation process is simple, you can bypass any obstacles inside the room (columns, machines, conveyors, etc.). The damaged single modular tile quickly can be replaced with a new one and there is no need to dismantle a number of installed modular tiles.

//osta.in.ua/wp-content/uploads/2018/01/3.png RESISTANCE TO LOADS

The construction and material of the light module tiles are able to withstand static and dynamic loads of up to 2 tons/dm2, in comparison it is the mass of a car or a palletized loader. The floor can withstand the weight of production equipment and warehouse shelves. The module tiles with more resistance (to weights, hits) are capable to hold a load of 3 tons/dm2, it is comparable to the weight of a loaded twenty-ton truck. The module tiles have natural reaction to the shock weights. The weight pressure doesn't ruin the tiles, no chips or cracks. The tiles absorb any hit on the surface due to elastic deformation of the material. That’s why any external shock influence doesn’t ruin the material.

//osta.in.ua/wp-content/uploads/2018/01/2.png SIMPLE INSTSALLATION/DISMANTLING

The installation of modular tiles is quick enough due to special locks on each side of the tile and there is no need to use certain tools and materials. No special skills or technical knowledge is required to install the floor. That means the floor can be installed and dismantled without participation of service engineering staff.


OSTA modular polymeric tiles, it is fast and economical solution of the floor covering problem! The surface does not require special preparation before the installation of the floor. The main characteristic of modular floors from PVC is: easy installation, strength and durability. OSTA floor tiles for technical rooms have resistant to static and shock loads, as well as to chemical reagents and temperature fluctuations. Modular industrial floors can be used in any industry (including chemical) such as: commercial warehouses, workshops, parking lots and livestock farms.